Precautions for the installation of the inlet and outlet of the Horizontal Multistage Pump
The installation of Horizontal Multistage Pump involves the installation of pump heads, motors and pipelines. The process is very complicated. If the installation of any link is not in place, it may cause the horizontal multistage centrifugal pump unit to fail to fully perform its energy efficiency in the later operation.
What are the structural forms of Horizontal Multistage Pump
With the development of society, Horizontal Multistage Pump has been widely used in various industries. The scope of application of multi-stage centrifugal pumps is mostly water, corrosive liquids, hydrochloric acid, etc.
The structure and characteristics of Horizontal Multistage Pump
Horizontal Multistage Pump is mainly a horizontal axially split volute multistage centrifugal pump, which is the BB3 pump in API610. This pump is mainly suitable for transporting media without solid particles.
Control method of stainless steel Horizontal Multistage Pump
The parts of Horizontal Multistage Pump are pressed by stainless steel plates and welded by laser. There are many grades of stainless steel available for selection.
Introduction to the control system of DG Multistage Pump
DG Multistage Pump is a kind of centrifugal pump, and it also relies on the rotation of the impeller to obtain centrifugal force, thereby material. When the gas density reaches the working range of the mechanical vacuum pump, it is pumped out, thereby gradually obtaining a high vacuum.