2CY Gear Oil Pump is suitable for conveying various lubricating liquids, the temperature is not higher than 70℃, if high temperature is required to be 200℃, high temperature resistant materials can be used. 2CY Gear Oil Pump is not suitable for transporting corrosive, hard particles or fibers, highly volatile or low flash point liquids, such as gasoline, benzene, etc.
The Suction principle of IS ISR End Suction Pump means to start the pump when the suction pipe does not need to be filled with liquid (but there must be enough liquid in the pump body).
IS ISR End Suction Pump is a new type of oil conveyor, which is widely used in various industries, factories and mines to transport and pump various oils, such as diesel, kerosene, and engine oil.
The support of the heat conduction oil pump adopts the structural form of double-end ball bearing support. The front end is lubricated with lubricating oil, the rear end is lubricated with grease, and there is an oil guide pipe in the middle to observe the sealing condition and recover the heat conduction oil at any time.
2CY Gear Oil Pump application: used to transport all kinds of lubricating liquids. Application of 2CY Gear Oil Pump: 2CY Gear Oil Pump is widely used in petroleum, chemical, shipbuilding, electric power, grain and oil, food, medical, building materials, metallurgy, national defense scientific research and other industries.