GC Horizontal Multistage Pump
Model-GC pump is the single suction multistage centrifugal pump, which is just used for pumping clean water without solid particles or other liquid whose physicochemical property is similar to that of clean water. It is suitable for industrial boiler feed water, factory or city water supply and drainage.
The direction of inlet and outlet of the pump are all vertical and upward, which can select different stages according to the needed head.
The stator part of the pump is composed of inlet section, medium section, outlet section, tail cover and bearing body.
The rotor part of the pump consists of shaft, impeller, shaft sleeve and balance disk and other parts, both ends are supported in ball bearing.
The stationary bonding surface of the inlet section, middle section and outlet section of the pump adopts paper gaskets to achieve sealing by tightening the tightening bolt. To prevent water from entering the bearing, "O" Type sealing ring is installed between the shaft sleeves. The shaft seals at both ends of the pump body use packing seal, keeping the leakage at about 30 drops per minute by adjusting the tightness of the gland bolts.
The bearing body at both ends has an annular cooling chamber. The bearing should be cooled by cold water, when the temperature of the liquid transported is over 80 degrees.
The calcium base butter grease in the bearing can be added through an oil cup
The pump turns clockwise, looking from the direction of the inlet section.
If you are interested in us, welcome your message, we will reply you in time!
We have won the title of “Contract-honoring and Promise-keeping Enterprise” for 10 consecutive years. The main products have the production license issued by the Ministry of Machinery...