Application fields of heat conduction oil pump
The support of the heat conduction oil pump adopts the structural form of double-end ball bearing support. The front end is lubricated with lubricating oil, the rear end is lubricated with grease, and there is an oil guide pipe in the middle to observe the sealing condition and recover the heat conduction oil at any time. The heat conduction oil pump is an ideal hot oil circulation pump or a heat carrier transfer pump, and an ideal matching pump for heat exchange equipment.
The heat conduction oil pump has advanced technology and high efficiency. It can operate stably for a long time without leakage in the hot state, without additional cooling system, and has the characteristics of safe and reliable use. It has been widely used in my country's heating medium heating system, and has entered oil, Chemical, rubber, plastic, pharmaceutical, textile, printing and dyeing, road construction, food and other industrial fields, heat conduction oil pump is mainly used to transport weak corrosive high temperature liquid without solid particles, operating temperature ≤ 400 ℃, heat conduction oil pump It is an ideal hot oil circulating pump.
The axial stability of the mechanical seal of heat conduction oil pump is discussed. Based on the experiment of the end face movement of the mechanical seal, the axial stability of the mechanical seal under the evacuation condition is discussed by using the fluid film phase transition theory, and the influence of the axial stability of the mechanical seal on the axial stability is analyzed. various factors of stability. According to the vapor-liquid two-phase intimacy theory, some useful suggestions are put forward for the design of anti-evacuated mechanical seals.
The heat conduction oil pump has the advantages of advanced technology, high efficiency, long-term stable operation at high temperature without leakage, no additional cooling system, safe and reliable use, etc. Weak corrosive high temperature liquid containing solid particles, operating temperature ≤ 370 ℃, is an ideal hot oil circulation pump.