NEWS CENTER
Installation and use skills of R Hot Water Circulation Pump products
Time：
2022-07-13
R Hot Water Circulation Pump products have the advantages of large flow, low noise, long life and no water leakage. So how are R Hot Water Circulation Pump products installed? How to use it after installation? We have sorted out these issues below. Let's look down together.
How to install R Hot Water Circulation Pump products
The installation method of R Hot Water Circulation Pump products is more complicated, and it is difficult to complete without certain professional knowledge. At this time, we should ask professional personnel to install it. If you don't understand it yourself, remember not to install it to avoid damage to the R Hot Water Circulation Pump products.
1. Before installation, please check carefully whether the running path of the pump is impacted. During operation, check whether there are hard objects (such as rocks, iron sand, etc.) in the flow channel of R Hot Water Circulation Pump products, so as not to damage the flow direction parts of the pump.
2. During the installation process, the weight of the pipeline should not bear on the pump, otherwise it will be easily damaged.
3. During the installation process, the anchor bolts must be tightened, and the pump should be checked regularly to prevent it from loosening, so as not to affect the performance of the pump due to vibration during startup.
4. R Hot Water Circulation Pump products and multi-stage integrated structure have been calibrated by the manufacturer before leaving the factory, and no adjustment is required during the installation process; therefore, the installation is very convenient:
5. Before installing the pipe, please rotate the rotor part of the water pump. There should be no friction or sticking. If so, the pump should be dismantled immediately to check the cause.
6. For the occasion of pumping head, it should be equipped with a bottom valve, and there should not be too many elbows in the water inlet pipe, so as not to leak water or air, so as not to affect the pumping performance.
7. Prevent impurities from entering. If the flow path is blocked in the pump, a filter should be installed before the inlet.
8. For the convenience of maintenance and safe use, please install a regulating valve on the inlet and outlet pipes of the pump, and install a pressure gauge near the inlet. For high lift pumps, install a check valve before the outlet gate valve to prevent water hammer. Check valve to deal with power failure such as sudden power failure, to ensure operation under optimal working conditions and prolong its service life.
Tips for using R Hot Water Circulation Pump products
1. After the installation of R Hot Water Circulation Pump products, plug in the power supply and try running for a few minutes to check whether the startup is normal. The idling time should not be too long to prevent the bearing life from being affected.
2. Before installing the water pump, make sure that there are no impurities in the pipeline, if any, it will affect its use.
3. When it is used for the first time, if there is air in the pump cavity of R Hot Water Circulation Pump products, it will not be able to pressurize it. After a week of continuous use, it should be exhausted once.
More News
CONTACT US
To provide high-quality water pumps for hundreds of boiler plants with export qualification!