How to choose customized ISW Horizontal Inline Pump
How to choose customized ISW Horizontal Inline Pump? There are many relevant factors to be considered, which need to be combined with the size of the construction environment, temperature changes, performance parameters required in the operation process, medium composition properties, etc. Correct selection can effectively ensure the stable progress of the transportation project. After the requirements and relevant technical parameters, the selection work will be carried out with the assistance of Zhongcheng Pump Industry.
How to choose customized ISW Horizontal Inline Pump mainly starts from the following aspects.
1. Environment: First of all, it is necessary to confirm the size and working conditions of the application site. The pipeline pump has a variety of structural models, and the corresponding selection can be made according to the installation site. In addition, pay attention to the temperature changes in the working environment. In the environment, the corresponding pump material needs to be selected. It is worth mentioning that the pipeline pump can be used for outdoor work under the premise of configuring the protective cover.
2. Parameters: Refers to the requirements of the water transport process for parameters such as flow, head, and pressure. Considering that the pipeline may be arranged too long or the specific gravity of the medium may be different during transportation, the actual performance of the pipeline pump may be slightly different from the theoretical performance. Therefore, It is recommended to choose between 30% and 100% of the rated flow range, and the pressure should be 20% to 30% higher than the pressure required by the actual process, so as to prevent abnormal failures such as overload or overcurrent during transportation.
3. Medium: The pipeline pump is specially used to transport pure liquid with a single composition. It can transport corrosive media, such as chemicals and other chemical plant wastewater discharge, but there are clear requirements for the particle content in the liquid. If the solid particle volume If it is too large, it will cause damage to the pump, so it is necessary to check in advance whether the medium to be transported meets the transport standards of the pump type.
After the above introduction, I believe that you also have a clear understanding of how to choose customized ISW Horizontal Inline Pump. In short, it is necessary to match the corresponding model according to the actual needs of the pump.